Sixfab Lab

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #55654
    Joel Bradt
    Participant

    I was able to get my sixfab-connected Pi to transmit to my listening-Argon Pi, but I am only able to send one, six-character message. As soon as the sixth character is typed, the message sends automatically. It then appears to error out, and despite letting me type, will not transmit anything else. The minicom AT terminal appears completely unresponsive except for echoing my keystrokes on the screen To get it to transmit again, I have to shut it down and restart the minicom program.

    Any ideas why it’s doing this, or what I could try?

     

     

    #55655
    Joel Bradt
    Participant

    #55672
    David Mozombite
    Keymaster

    Hi Joel,

    After the first six characters it will respond with the SEND OK command letting you know that it has completed that transmission. To send another longer or shorter transmission, resend the QISEND command and change the “6” that to either a larger number for more characters, or a smaller number of less characters.  That number limits how many characters can be entered at a time. You can send other AT commands after the transmission.

    Let me know if there’s any issues!

    David

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.